Point collar
Narrow spread with longer points angled downward. Lengthens the neckline and suits narrower tie knots.
- Setting
- Classic business
- Tie
- Four-in-hand
A formal shirt is a structure of precisely shaped panels, reinforced edges and measured details. This reference explains each part — collars, cuffs, plackets and the components that hold them together — and what each one contributes to the look of the finished garment.
A / EThe shirt detail experience
Select a numbered point on the photograph — or a tab beside it — to see what each detail is, what to look for and how it shapes the finished shirt.

PL. 01Folded formal shirt — collar, placket, cuff and cloth
The collar points sit wide apart, leaving a generous space between them — the defining trait of a spread collar. This shape frames a fuller tie knot and looks equally composed when worn open.
A single row of fine topstitching runs close to the collar edge. Narrow, even stitching holds the layers of the collar together and keeps the edge crisp after pressing.
The top button closes the collar band. Its position sets how the collar sits around the neck and how cleanly the points fall when a tie is worn.
A horizontal buttonhole on the collar band, with dense, even stitching around its edges. Well-finished buttonholes do not fray and hold the button firmly in place.
The front of the shirt closes along the placket with small, light buttons. A well-made placket lies flat and straight, keeping a clean vertical line from the collar to the hem.
The sleeve ends in a barrel cuff fastened with a button, its corner cut at an angle. The cuff is interlined so it keeps a firm, clean shape at the wrist.
The circular inset shows the cloth enlarged. Close inspection like this reveals the smoothness of the surface and the evenness of the weave — qualities that decide how the shirt looks in daylight.
B / ECollar construction
A collar is built from two parts — the stand (or band), which wraps the neck, and the leaf, which folds over it. Interlining between the layers gives it shape. The angle and length of the points set the collar's character.
Narrow spread with longer points angled downward. Lengthens the neckline and suits narrower tie knots.
A moderate opening between point and spread — the most versatile collar for work and occasions.
Points set wide apart to frame a fuller knot. Formal, modern and balanced with or without a tie.
Points swept back almost horizontally. A strong, contemporary statement that needs a confident tie knot or none.
Points fastened to the shirt front with small buttons, producing a soft roll. Rooted in sport; the least formal collar.
A traditional, moderate collar with medium points — the standard on many classic formal shirts.
A contemporary variation: a collar stand with no leaves. Clean and minimal, designed to be worn without a tie.
A contemporary variation with shorter points and a modest spread; neat under slim lapels.



C / ECuff construction
Cuffs are interlined like collars, so they hold a firm shape. A sleeve placket above the cuff — a short, finished opening — lets the cuff open wide enough for the hand.
A single band fastened with one button. Clean and practical; the everyday standard on formal shirts.
A barrel cuff with two buttons side by side, or two buttonhole positions to adjust the fit at the wrist.
Also called the French cuff: a deep cuff folded back on itself and fastened with cufflinks. The most formal option.
A barrel cuff with an extra buttonhole so it can be worn with either a button or a cufflink.

On the shirt shown here, the collar and cuffs are made in plain white against a striped body — a contrast detail that draws the eye to the two places where a shirt meets a jacket. Whatever the style, look for cuffs that sit flat, with corners cut evenly on both sleeves and a sleeve placket that closes neatly above.
Under a jacket, roughly a quarter to half an inch of cuff should show. That small band of cloth is why cuff construction matters as much as it does.
D / EPlacket construction
The placket is the front opening that carries the buttons and buttonholes. Its construction affects how clean, formal and durable the front of the shirt looks.
A separate strip of cloth sewn on top of the front edge with a stitch line on each side. Structured and the most common on formal shirts.
No visible strip — the front edge is simply folded under and finished. Cleaner and slightly dressier.
A fly front that hides the buttons behind a fold of cloth. Minimal, sleek and often used on evening shirts.
A placket with extra interlining and additional stitching for strength and a crisp, flat front.


Because it runs down the centre of the body, the placket is the line the eye follows. A placket that ripples, twists or gapes between buttons undermines even the finest cloth. A half placket — opening only part-way down — is a contemporary variation seen on band-collar shirts.
E / EShirt components
Beyond collar, cuff and placket, these are the parts that give a formal shirt its shape, comfort and durability.
A panel across the upper back joining the back body to the shoulders. It shapes the shirt over the shoulder blades and supports the weight of the sleeves. A split yoke — cut in two pieces — can follow the shoulders more closely.
Creates a clean, structured line across the shoulders and back.
Folds set into the back where it meets the yoke: a box pleat at the centre or two side pleats near the shoulders. They add room for reaching and moving the arms.
Box pleats read classic; side pleats look neater; no pleats give the sleekest back.
Cut and set to allow movement while ending at the wrist bone. Each sleeve has a placket above the cuff so the hand can pass through.
Sleeve width decides whether the shirt looks lean or relaxed.
Where the sleeve joins the body. Higher, smaller armholes allow greater freedom of movement and a closer fit; lower ones give more room but lift the shirt when the arm is raised.
Higher armholes give a trimmer, more tailored outline.
Join front and back panels. They may be straight or shaped towards the waist, and are often finished with a flat-felled seam for strength and neatness.
Straight seams look classic; shaped seams create a tapered silhouette.
The finished lower edge. Formal shirts usually have a curved tail that stays tucked; straight hems are shorter and made for wearing untucked.
A long, curved hem keeps the waistline clean when tucked.
Small fastenings, commonly flat four-hole designs. They should be sewn securely and sit flat against the placket without twisting the cloth.
Tonal buttons look minimal; contrast buttons add emphasis.
Stitched openings that receive the buttons — vertical on the placket, horizontal on the collar band and cuffs. Dense, even stitching resists fraying.
Clean buttonholes are a quiet sign of careful finishing.
A hidden layer inside the collar, cuffs and often the placket. Fused interlinings are bonded for a crisp, stable shape; sewn interlinings give a softer, more natural roll.
Determines whether the collar looks crisp, soft, structured or relaxed.
The thread that holds the shirt together. Even, closely spaced stitches along collars, cuffs and seams indicate care in construction and help the garment keep its form.
Fine, straight stitching gives edges a precise, finished appearance.